Vinyl Decal Application Instructions

Things you need for applying your decal(s): a clean soft cloth, water, a credit card or a ruler.

Step 1
Spray some water on the area you want to apply your decal and clean thoroughly with a soft clean cloth.

( Do not use Windex or similar products because it will leave a residue behind that will prevent the sticker from adhering well. )

Step 2
Using your credit card or a squeegee to rub the decal surface.

(This will remove any air bubbles that may have formed and makes the decal cling to the transfer tape. )

Step 3
Peel off the clear transfer tape from the decal. If the decal clings to the backing, slowly replace the clear sheet backing and repeat Step 2.

Step 4
Find a place you want to stick and slowly peel the clear transfer tape from the top corner. Once the whole decal came off from the clear transfer tape, position your decal and using a squeegee or credit card rub the whole decal surface.

Step 5
Slowly peel the clear transfer tape off at an angle. Be careful not to pull the decal off the surface. If the decal pulls away from the surface repeat Step 4.